Home > John Deere > Engine
Sort By:
Page of 16
Valve Stem Seal Valve Keeper Valve Keeper
Valve Stem Seal
Our Price: $0.69
Valve Keeper
Our Price: $0.89
Valve Keeper
Our Price: $0.99
Valve Stem Seal Valve Keeper Valve Keeper
Valve Keeper O-Ring, R26906 Brass Manifold Nut
Valve Keeper
Our Price: $1.09
O-Ring, R26906
Our Price: $1.45
Brass Manifold Nut
Our Price: $2.99
Valve Keeper
Fits John Deere - Fits various models; Replaces: R26906


0.750" I.D.
0.093" Thickness
90 durometer

 		Brass Manifold Nut
Valve Spring Valve Seal, Positive Lock Valve Stem Cap, T20129, John Deere
Valve Spring
Our Price: $2.99
JD Industrial - Fits: 401, 500, 600, 2WD Loader: 300, 301, 400, Bulldozer: 450, Loader, Crawler: 350
Fits John Deere - 1020, 1445F, [ 1640, 2040, 2040S, 2140, 3140 (SN: 430000 and up) ], 1745F, 1845F, 2020, 2150, 2155, 2255, 2345F, 2350, 2355, 2355N, 2510, 2550, 2555, 2750, 2755, 2840, 2855N, 2950, 2955 (up to SN: 767516), 3040, 3055, 3150, 3155, 3255, 4020 (up to SN: 200999), 4040S, 4240S, 4320, 4350, 4620, 5045D, 5045E, 5055D, 5055E, 5065E, 5075E, 5075M, 5076E, 5082E, 5083E, 5085M, 5090E, 5093E, 5095M, 5095MH, 5101E, 5103, 5105M, 5105ML, 5200, 5203, 5300, 5303, 5400, 5403, 5425N, 5500, 5525N, 5603, 5605, 5705, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6215, 6220, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6403, 6405, 6410, 6410L, 6410S, 6415, 6420, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, 6603, 6605, 6615, 6715, 7020, 7200, 7210, 7220, 7320, 7330, [ 7330, 7430 (Premium) ], 7400, 7410, 7420, 7430, 7505, 7510, 7520, 7600, [ 7610, 7710, 7810 (up to SN: 089999) ], 7700, 7800, 820 3 cylinder, 830 3 cylinder, 8560, 8570, 8760, 8770, 8870, 8960, 8970, 9100, 920, 9200, 9230, 9300, 9330, 9400, 9430, 9430T, 9530, 9530T, 9630, 9630T, Feller Buncher: 840 (up to SN: 599999), Winch: 3320; Replaces: R26125



 		Valve Seal, Positive Lock
JD Industrial - Fits: 310
Fits John Deere - 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1850N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 3020, 3030, 3040, 3055, 3120, 3130, 3140, 3150, 3155, 3255, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 510, 7020, 7700, 7710, 7800, 7810, 7820, 7920, 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 820 3 cylinder, 8210, 8210T, 8220, 8220T, 8300, 8300T, 830 3 cylinder, 8310, 8310T, 8320, 8320T, 8400, 8400T, 8410, 8410T, 8420, 8420T, 8430, 8440, 8450, 8520, 8520T, 8560, 8570, 8770, 8870, 9100, 9120, 920, 930, 940; Replaces: T20129


0.511" O.D.
0.375" I.D.
0.227" Tall
0.118" Inside Depth
Exhaust Manifold Gasket Connecting Rod Bolt Intake Manifold Gasket
Exhaust Manifold Gasket
Our Price: $3.99
Connecting Rod Bolt
Our Price: $4.99
Intake Manifold Gasket
Our Price: $4.99
JD Combines - Fits: 6620, 6622, 7700, 7720, 8820, 9500, 9510, 9550, 9550SH, 9600, 9610, 9650, 9650STS, 9660, 9660STS, 9750STS, 9760STS
Fits John Deere - 3010, 3020, 4000, 4010, 4020, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7710, 7800, 7810, 8430 (1974-84), 8440, 8450, 8560, 8570, 8640, 9100, 9200; Replaces: R83020, RE62776

  • JD Combines - Fits: [ CTS, 9780CTS (SN: 071443-072697) ], 2256, 2258, [ 2264, 2266 (up to SN: 068583) ], 6600, 6602, 6620, 6622, 7700, 7720, 8820, 9500, 9510 (SH), 9550SH, 9560WTS (up to SN: 080015), 9580WTS, 9600, 9610, 9640WTS, 9650 (CTS), 9660CTS, 9680 (WTS), 9750STS, 9760STS
    JD Miscellaneous - Fits: Sprayer: 4920
    Fits John Deere - [ 3010, 3020, 4000, 4010, 4020 (Diesel only) ], 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7700, 7800, 7810, 7820, 7920, 8100, 8100T, 8110T, 8120T, 8200, 8200T, 8210T, 8220T, 8300, 8300T, 8310T, 8320T, 8400, 8400T, 8410T, 8420T, 8430, 8440, 8450, 8520T, 8560, 8570, 9100, 9120, Harvester: 1470D, 3510 (NW up to SN: 060036), 5200, 5400, 5440, 5720, 5730, 6610, 7200, 9940, 9950; Replaces: R26325, R53290, R66452

    For connecting rods with the following casting numbers
    • R26047
    • R41423
    • R57303
    • R58880
    • R58882
    • R66922
    • R66923
    • R67320
    • R71074
    Fits John Deere Ind: 250, 300, 330, 370, 530B, 535, 560D, 608, 644, 660D, 724, 740, 748, 753, 759, 770, 772, 848G, 850, 853, 870, 872, 900 (SN: 001001 and up), 903, 909, 950 (SN: 009004 and up), 953, 959, 1710, 1711

    • Sold Individually
    • Bolt Grade: R
    • 9/16 - 18 NF threads
    • 2.484" Length
    • PLEASE verify your model and rod casting number is listed before ordering
JD Combines - Fits: CTS, CTS II, 6620, 6622, 7722, 9510, [ 9550, 9550SH (up to Engine SN: 156457) ], 9610, 9650, 9650STS, 9660, 9660CTS, 9660STS, 9750STS, 9760STS
JD Industrial - Fits: 330LCR, 540E, 548E, 640E, 644H, 644J, 648E, 690B, 693B (Engine SN: 512306 and up), 724J, 740E, 748E, 770A, 770B, 772A, 772B
JD Miscellaneous - Fits: Cotton Picker: 9970, 9976, 9986, 9996
Fits John Deere - 4050, 4055, 4240, 4250, 4320, 4430 (Engine SN: 512306 and up), 4440, 4450, 4455, 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7710, 7720, 7810, 7820, 7920, 8120, 8120T, 8220, 8220T, 8320, 8320T, 8420, 8420T, 8430 (1974-81), 8440, 8450, 8520, 8520T, 8560, 8570, 8640, 9100, 9120, 9220, 9320, 9420, 9520, 9620, [ Forage Harvester: 5200, 5400 (Engine SN: 335846 and up) ], 5440, 5720, 5730, 6610, 7200, 7400, 7500; Replaces: R130573


1/16" Thick
Valve Guide Valve Guide Exhaust Manifold Gasket
Valve Guide
Our Price: $4.99
Valve Guide
Our Price: $4.99
Exhaust Manifold Gasket
Our Price: $4.99
JD Industrial - Fits: 500 (Gas, Late), 500A (Gas, up to SN: 123113), 600 (Gas, up to SN: 200999)
Fits John Deere - [ 3010, 4010 (Gas) ], 3020 (Gas, up to SN: 122999), 4020 (Gas, up to SN: 200999); Replaces: R28653

Fits tractors with the following John Deere Gas engines:
201
227
301
341
JD Industrial - Fits: 500 (Diesel, Late), 500A (Diesel, up to SN: 123123), 600 (Diesel, up to SN: 200999)
Fits John Deere - [ 3010, 4010 (Diesel) ], 3020 (Diesel, up to SN: 122999), 4020 (Diesel, up to SN: 200999); Replaces: R28654

Fits tractors with the following John Deere Diesel engines:
254D
270D
381D
404D
JD Combines - Fits: 6600, 6620, 6622, 7700, 7720, 8820, 9500, 9510, 9550, 9550SH, 9600, 9610, 9650
Fits John Deere - 3010, 3020, 4000, 4010, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 8430 (1974-81), 8440, 8450; Replaces: R83021, RE62777
Connecting Rod Bolt Oil Pump Pressure Relief Valve Spring Engine Sleeve Sealing O-Ring Kit
Connecting Rod Bolt
Our Price: $4.99
JD Combines - Fits: 3300
JD Industrial - Fits: 300, 300B, 301, 301A, 302, 302A, 310, 310B, 400, 401, 401B, 401C, 401D, 410, 410B, Crawler: 350B, 350C, 350D, 450, 450B, 450C, 450D, 455D, Forklift: 380, 480, 480A, 480B, 480C, Skidder: 440, 440B, 540B
Fits John Deere - 1020, 1030, 1520, 1530, 2020, 2030, 2035, 2040, 2120, 2440, 2510, 820 3 cylinder, 830 3 cylinder, 920, 930, Cotton Picker: 499, Mower: 1420, Windrower: 2270, 2280, 2320, 2420; Replaces: R74194
Sold Individually
12.9 Bolt Grade
7/16-20NF x 2-3/16" Length
JD Industrial - Fits: Backhoe Loader: 500, 500A, 500B, 500C, 510, Elevating Scraper: 760, Excavator: 690, 690A, Loader, Four-Wheel Drive: 670, Tractor: 500, 600, 700A, 760A
JD Miscellaneous - Fits: Compactor: 646B (up to SN: 223644), Compactor: 646 (up to SN: 223644), Harvester: 5200, 5400
Fits John Deere - 3010, 3020, 4000, 4010, 4020, 4230, 4320, 4520, 4620, 5010, 5020, 6030, 7020; Replaces: A655R, R36715


0.522" O.D.
0.058" Wire Diameter
1.500" Free Length
0.754" Solid Length
13 Coils
  • JD Industrial - Fits: [ 300, 300B, 301A, 350B, 380 (Diesel ESN 154766 & up) ], [ 400, 480 (Diesel ESN 158258 & up) ], 544 (Diesel ESN 158977 & up), Skidder: 440 (Diesel ESN 158258 & up)
    Fits John Deere - [ 1020, 820 3 cylinder, 830 3 cylinder (ESN 154766 & up) ], [ 2020, 2510 (Diesel ESN 158258 & up) ]; Replaces: AR65070, AR71617, AT31609, DD13275, R48767


    • (2) O-Rings measure
      • 0.130" Thick
      • 4-1/4" I.D.
    • (1) Quad Ring measure
      • 0.140" Thick
      • 3-7/8" I.D.
    Bore Diameter: 3.860"
    Flange Outer Diameter: 4.8415"
    Flange Width: 0.238"
    Sleeve O.D. at Pilot: 4.5293"
    Sleeve O.D. at Barrel: 4.450"
    Sleeve Outer Diameter at Seal: 4.2365"
    Length: 7.720"
    Firewall: 0.030
    Sleeve Type: Wet
Piston Wrist Pin Bushing Camshaft Bearing / Bushing, R46903 Heat Exchanger Clamp, Stud & Nut
JD Combines - Fits: [ 6600, 7700 (with 6-404D Engine, ESN: 335,846 and up) ]
JD Industrial - Fits: 500 (with 4-270D Engine), 500A (with 4-270D Engine up to ESN: 280,000 ), [ 500B, 500C, 510 (with 4-270D Engine, ESN: 280,001 and up ) ], 600 (with 6-404D Engine, ESN: 335,846 and up)
Fits John Deere - 3010 (with 4-270D), 3020 (with 4-270D Engine), [ 4000, 4040 (with 6-404D Engine) ], [ 4010, 4020, 4230 (with 6-404D) ]; Replaces: R30939

Fits the following diesel engines: D270, D380, D404

1.499" inside diameter
1.625" outside diameter
1.500" length
Fits diesel engines only
 		Camshaft Bearing (bushing) HEAT EXCHANGER CLAMP STUD & NUT
Fan Friction Washer, John Deere D399R, R105808, A, B, G, H, 50, 60, 70, 520, 530, 620, 630, 720, 730 Carburetor Gasket Kit Oil Pump to Crankcase Gasket, B251R
Carburetor Gasket Kit
Our Price: $6.99
Fan Friction Washer CARBURETOR GASKET KIT - JOHN DEERE A AO AR B D G
  • Fits John Deere - [ A, AH, AN, ANH, AW, AWH (all SN: 424025 and up) ], [ AI, AO, AR (all SN: 251486 and up) ], B, BI, BN, BNH, BO, BR, BW, BWH, BWH, BWH40, G, GH, GM, GN, GW, R (2 used), 50, 520, 530, 60, 620, 630, [ 70, 720, 730 (all gas and LP) ]; Replaces: B251R


    • 0.031" thick
    • 3 bolt hole pattern
Oil Pump Gear Cover Gasket, B246R Engine Sleeve Sealing O-Ring Kit Valve Lifter (Tappet)
Valve Lifter (Tappet)
Our Price: $7.99
  • Fits John Deere - [ A, AH, AN, ANH, AW, AWH (all SN: 424025 and up) ], [ AI, AO, AR (all SN: 251486 and up) ], B, BI, BN, BNH, BO, BR, BW, BWH, BWH40, G, GH, GM, GN, GW, H, HN, HNH, HW, HWH, R, 50, 520, 530, 60, 620, 630, [ 70, 720, 730 (all gas, LP, diesel) ], 80, 820 2 cylinder, 830 2 cylinder, 840; Replaces: B246R


    • 0.020" thick
    • 4 bolt hole
  • JD Industrial - Fits: 301A (SN 710722 & up), 302, 302A, Backhoe Loader: 310 (diesel)
    Fits John Deere - 1035, 1130, 1520, 1530, 1830, 2030, 2035, 2040 (up to SN: 349999), 2120, 2440, [ 2520, 4030 (diesel) ], 2840, 3030, 3130, 3135, 930; Replaces: AR71618, AT31610, DD13276, R48768


    • (2) O-Rings Measure
      • 0.135" Thick
      • 4-3/8" I.D.
    • (1) Quad Ring measure
      • 0.125" Thick
      • 4-1/8" I.D.
      • Verify tractor Model before ordering
  • JD Combines - Fits: 1032, 1042, 1052, 1055, 1065, 1068H, 1072, 1075, 1085, 1133, 1144, 1155, 1157, 1158, 1165, 1166, 1169, 1174, 1175, 1177, 2054, 2254, 3300, 4400 (diesel), 4420, 4425, 4435, 6600 (gas or 329 c.i. diesel), 925, 930, 932, 935, 940, 9400, 942, 945, 950, 952, 955, 960, 965, 965H, 968H, 970, 975, 985
    JD Industrial - Fits: Crawlers: 350, 350B, 350C, 350D, 355D, 400G, 450, 450B, 450C, 450D, 450E, 450G, 455D, 455E, 455G, 655B, 750B, 750C, 755, 755A, 755B, Excavator: 690ELC, 790ELC, Feller Buncher: 643, 643D, 653E, Forklift: 380, 480, 480A, 480B, 480C, 482C, Loader: 344E, 344G, 444 , 444D , 444E, 444G, 544 , 544A , 544B, 544C, 544D, 544E, 544G, 624E, 624G, Log Skidder: 440, 540G, 548G, 640, 640D, 640G, 648D, 648G, Motor Grader: 570, 670, 670A, 672A, Skid Steer: 240, 250, 260, Telescopic Handler: 4400, 4500, Tractors / Backhoes: 210C, 300, 300B, 300D, 301, 301A, 302, 302A, 310, 310A, 310B, 310C, 310D, 315C, 315D, 400, 401, 401B, 401C, 401D, 410, 410B, 410C, 410D, 415B, 515B, 610B, 610C, 710B, 710C, 710D
    JD Miscellaneous - Fits: Cotton Pickers: 9900, 9910, 9920, 9930, Cotton Strippers: 7445, 7450, Forage Harvester: 5420, Hi-Cycle: 6000, Skid Steer: 8875, Windrowers: 2280, 2360, 2420, 3430, 3830, self-propelled sprayers: 6100, 6600
    Fits John Deere - SE6100, SE6200, SE6300, SE6400, 1020, 1030, 1030OU, 1030VU, 1035, 1035EF, 1035EV, 1040, 1040V, 1120, 1130, 1140, 1140F, 1140V, 1350, 1445F, 1520, 1530, 1550, 1630, 1630OU, 1630VU, 1635, 1635EF, 1635EV, 1640, 1640F, 1745F, 1750, 1750V, 1830, 1840, 1840F, 1845F, 1850, 1850F, 1850N, 1850V, 1950, 1950F, 1950N, 2020, 2030, 2030OU, 2035, 2035EF, 2040, 2040F, 2040S, 2120, 2130, 2135, 2140, 2150, 2155, 2240, 2250, 2250F, 2255, 2345F, 2350, 2355, 2355N, 2440, 2450, 2450F, 2510, 2520, 2550, 2555, 2630, 2640, 2650, 2650F, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3100, 3110, 3120, 3130, 3135, 3140, 3150, 3155, 3200, 3200X, 3210, 3210X, 3255, 3300, 3300X, 3310, 3310X, 3340, 3350, 3400, 3400X, 3410, 3410X, 3640, 3640S, 3650, 4030, 4040, 4040S, 4050, 5103, 5103E, 5103S, 5104, 5105, 5200, 5203, 5204, 5205, 5210, 5215, 5215F, 5215V, 5220, 5300, 5300N, 5303, 5310, 5310N, 5315, 5315F, 5315V, 5320, 5320N, 5400, 5400N, 5410, 5410N, 5420N, 5500, 5500N, 5510, 5510N, 5520N, 5600, 5700, 5B-550 (up to SN: 009920), 6100, 6200, 6200L, 6300, 6300L, 6400, 6400L, 6400SP, 6500, 6500L, 6506, 6600, 6800, 6900, 7200, 7220, 7320, 7400, 7500, 7600, 820 3 cylinder, 830 3 cylinder, 840 3 cylinder, 920, 930, 930VU, 940, 940V, Cotton Strippers: 484, 7440, Crawlers: 550, 550A, 550B, 550G, 555, 555A, 555B, 555G, 650G, 655, 750, Excavator: 190E, 290D, 490, 490D, 490E, 493D, 495D, 590D, 595, 595D, 690D, 693D, 70, 70D, Loader: 444C, Log Skidder: 440A, 440B, 440C, 440D, 448D, 540, 540A, 540B, 540D, 540E, 548D, 548E, 640E, 648E, 740E, 748E, 748G, Motor Grader: 570A, 570B, 670B, 672B, Skid Steer: 24 (with diesel engine), Tractors / Backhoes: 510B, 510C, self-propelled sprayers: 5B-554-1; Replaces: T20073
    Miscellaneous - Replaces: 213-1744

    • 2.138" overall length
    • 1.245" lifter face O.D.
    Fits the following John Deere engines: 135, 152, 164, 179, 180, 202, 219, 239, 276, 303, 329, 359, 3029D, 3029H, 3029T, 3179D, 3179T, 4039D, 4039T, 4045D, 4045T, 4219D, 4239D, 4239T, 4276, 6059, 6068D, 6068T, 6329D, 6359D, 6359T, 6414D, 6414T

    Replaces Mahle 213-1744.

    • 2.138" overall length
    • 1.245" lifter face O.D.
Hose - Air Cleaner to Carb Hose and / or Lower Water Hose Carburetor Gasket Kit, John Deere dual induction carburetor Connecting Rod Bushing
Connecting Rod Bushing
Our Price: $7.99
HOSE (AIR CLEANER TO CARB OR LOWER) SEE DESCRIPTION - JOHN DEERE A B 50 520 530 60 620 630 CARBURETOR GASKET KIT (END GASKETS FOR JD DUAL INDUCTION CARBURETORS) - JOHN DEERE 50 60 70 520 530 620 630 720 730 Fits John Deere - 1950, 2140, 2650, 2750, 2850, 2855N, 3255, 3650, 4040, 4050; Replaces: R56186, R57451, RE63913


  • 1 per piston
  • 1.350" Long
  • 1.820" O.D.
  • 1.628" I.D.